Bradite Bitumen Finish an air drying bituminous paint for concrete and steel.

As well as concrete Bradite Bitumen Finish is also for steel, galvanised steel and brick walls, floors and groundworks where excellent water resistance is required. It provides a tough abrasion resistant film suitable for use under water. It is recommended as a waterproof coating to stop the ingress of moisture in marine and industrial environments. It is available in a black gloss finish.


  • 5ltr


Bradite Bitumen Finish is a solvent based high build bitumen gloss coating and finish paint for walls, structural steel, galvanised substrates, concrete and brick. Bradite Bitumen Finish is a tough hard wearing coating with excellent water resistance suitable for immersion in non drinking water conforming to BS 3416 and BS6949, Type 1 Class A.  Bradite Bitumen Paint is recommended for groundworks, piling and other marine applications it has excellent adhesion without the need for abrasive blast cleaning. Bradite Bitumen Paint can be applied by airless or conventional spray, brush and roller.

Bradite Bitumen Finish is applied up to 30 microns per coat, two coats may be required to achieve the recommended DFT by brush or roller.

Surface Preparation

Carbon steel: Min St 3 (ISO 8501-1).

Cladding: Surface to be clean and dry, free from oil grease and other contaminants.

Technical Data

Volume Solids (ISO 3223):  47%
VOC Content:   500g/lt
Flash point (ISO 3679):  38c
Dry Film thickness:  30 microns
Wet Film thickness:  64 microns
Theoretical coverage:  16 sq m/lt
Touch Dry 23c:  4 hrs
Overcoat 23c:  16 hrs
Nozzle tip:  18 thou Airless Spray, 2mm Conventional
Pressure at nozzle:  2100psi Airless, 60psi Conventional
Thinner:  TW35.
H&S:  Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Additional information



Choose Your Colour


Choose Pack Size


Related Products