Bradite Chlorinated Rubber a Fast Air Drying chlorinated rubber paint for concrete and metal

Bradite Chlorinated Rubber is ideal for use on concrete and metal structures where excellent water and chemical resistance is required.

Bradite Chlorinated Rubber provides a tough abrasion resistant film suitable for use under water or areas requiring resistance to fungal growth.

Bradite Chlorinated Rubber is recommended for use in immersed conditions or to protect metals and concrete from chemical spillages.

Bradite Chorinated Rubber is available in an extensive range of RAL & BS colours in a gloss or matt finish.

£69.95

  • 5ltr
Clear

Description

Bradite Chlorinated Rubber is ideal for concrete, ferrous and non ferrous metal substrates where excellent water and chemical resistance is required. It provides a tough abrasion resistant film suitable for use under water or areas requiring resistance to fungal growth. It is recommended for use around swimming pools and wet areas subject to heavy water cleaning regimes. It is available in an extensive range of RAL & BS colours in a gloss or matt finish.

Bradite Chlorinated Rubber is a fast drying, high performance, single pack chlorinated rubber undercoat or topcoat with excellent chemical and water resistance. Bradite Chlorinated Rubber Finish has good weathering properties on structural steel, concrete and brick and is resistant to fungal growth. Bradite Chlorinated Rubber Finish is recommended for use around swimming pools, marine structures and can be used in immersed environments. Bradite Chlorinated Rubber Paint can be applied by airless or conventional spray, brush and roller.

Bradite Chlorinated Rubber Paint is applied up to 45 microns per coat, two coats may be required to achieve the recommended DFT by brush or roller.

Surface Preparation

Carbon steel: Min Sa 2.5 (ISO 8501-1).

Concrete and Brick: Surface to be clean and dry, free from oil grease and other contaminants.

Technical Data

Volume Solids (ISO 3223): 45%

VOC Content: 524g/lt

Flash point (ISO 3679): 38c

Dry Film thickness: 45 microns

Wet Film thickness: 100 microns

Theoretical coverage: 10 sq m/lt

Touch Dry 23c: 4 hrs

Overcoat 23c: 30 mins

Nozzle tip: 23 thou Airless Spray, 2mm Conventional

Pressure at nozzle: 2100psi Airless, 60psi Conventional

Thinner: TC32.

H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Additional information

Brand

Bradite

Choose Your Colour

RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016

Choose Pack Size

5ltr

Related Products