Bradite Cladit Plus a High Performance two pack solvent based polyurethane finish for steel cladding
Cladit Plus has long lasting protection of exterior cladding, buildings and structures. Cladit Plus provides a tough hard wearing finish with excellent colour retention and water resistance. It can be applied on primed steel, non ferrous substrates and direct to most external cladding including Plastisol, PVF2 and Polyester powder. Available in a wide range ofRAL and British Standard colours in a gloss and satin finish.
Bradite Cladit + Semigloss is a two pack, high performance polyurethane finish paint for exterior cladding renovation. Bradite Cladit+ is recommended for exterior cladding requiring a hard wearing, flexible, weather resistant coating. Bradite Cladit+ Paint has excellent adhesion to coil, plastisol and powder coated cladding without the need for abrasive blast cleaning. Bradite Cladit+ Paint can be applied by airless or conventional spray, brush and roller.
Bradite Cladit+Coating is applied up to 53 microns per coat, two coats may be required to achieve the recommended DFT by brush or roller.
Carbon steel: Min St 2 (ISO 8501-1).
Concrete and tiles: Surface to be clean and dry, free from oil grease and other contaminants
Volume Solids (ISO 3223): 53%
VOC Content: 198g/lt
Flash point (ISO 3679): 28c
Dry Film thickness: 53 microns
Wet Film thickness: 100 microns
Theoretical coverage: 10 sq m/lt
Touch Dry 23c: 1hr
Overcoat 23c: 12 hrs
Mix Ratio: 2:1
Pot Life: 6 hrs
Nozzle tip: 18 thou Airless Spray, 2mm Conventional
Pressure at nozzle: 2100psi Airless, 60psi Conventional
Thinner: Bradite TP33
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
|Choose Your Colour||
RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016
|Choose Pack Size||