Bradite Cladit a unique fast drying single pack Hygienic Waterbased primer finish for steel cladding

Bradite Cladit provides long lasting protection of exterior cladding and facades.

Bradite Cladit produces a hard wearing finish with excellent colour retention and durability.

Bradite Cladit can be applied direct to most external cladding including Plastisol and PVF2.

Bradite Cladit is environmentally compliant waterbased technology with low odour and low VOCs. It is suitable for use in hygiene sensitive locations containing no solvents.

Bradite Cladit can be applied by roller or spray and ia available in a wide range of RAL and British Standard colours in a satin finish.

All RAL & British Standard colours are available in a semigloss finish. Follow the link for the full  RAL and BS range.

£66.50

Clear

Description

Bradite Cladit provides long lasting protection of exterior cladding and facades. Cladit provides a hard wearing finish with excellent durability and colour retention. It can be applied direct to most external cladding including Plastisol and PVF2. Available in a wide range of RAL and British Standard colours in a satin finish.

Bradite Cladit is a unique single pack water based polyurethane acrylic finish for long lasting protection of exterior cladding elevations.

Bradite Cladit is recommended for exterior cladding requiring a hard wearing, flexible, weather resistant coating. Bradite Cladit Paint has excellent adhesion to coil, plastisol and powder coated cladding without the need for abrasive blast cleaning. Bradite Cladit Paint has low VOCs and can be applied by airless or conventional spray, brush and roller.

Bradite Cladit Coating is applied up to 45 microns per coat, two coats are recommended by spray, more coats may be required to achieve the recommended DFT by brush or roller.

Surface Preparation

Carbon steel: Min St 2 (ISO 8501-1).

Cladding: Surface to be clean and dry, free from oil grease and other contaminants.

Technical Data

Download Datasheet

Volume Solids (ISO 3223):  45%

VOC Content:  7g/lt

Flash point (ISO 3679):  Not Applicable

Dry Film thickness:  45 microns

Wet Film thickness:  100 microns

Theoretical coverage:  10 sq m/lt

Touch Dry 23c:  1hr

Overcoat 23c:  4 hrs

Nozzle tip:  18 thou Airless Spray, 2mm Conventional

Pressure at nozzle:  2100psi Airless, 60psi Conventional

Thinner:  Not Required.

H&S:  Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Additional information

Brand

Bradite

Choose Your Colour

RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016

Choose Pack Size

5ltr

Related Products