A Fast Air Drying chlorinated rubber floor and wall coating
Bradite floor finish is for concrete and steel where excellent water and chemical resistance is required. It provides a tough abrasion resistant film which is suitable for use under water or areas requiring resistance to fungal growth. It is recommended for use around swimming pools and wet areas subject to heavy water cleaning regimes. It is available in an extensive range of RAL & British Standard colours in a semigloss finish.
Bradite Floor Finish is a single pack, high build high performance chlorinated rubber floor coating, hard wearing with excellent chemical and water resistance. It can be applied on concrete and steel flooring subject to medium traffic and may be immersed in non drinking water.
Bradite Floor Finish is resistant to fungal growth and is suitable for application by brush or roller.
Bradite Floor Finish is applied up to 45 microns per coat by spray, two coats may be required to achieve the recommended DFT by brush or roller. A total thickness of 90 microns is recommended for optimum performance.
Carbon steel: Min St2 (ISO 8501-1).
Concrete and Wood: Surface to be clean and dry, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 45%
VOC Content: 498 g/lt
Flash point (ISO 3679): 26c
Dry Film thickness: 45 microns
Wet Film thickness: 100 microns
Theoretical coverage: 10 sq m/lt
Touch Dry 23c: 2 hrs
Overcoat 23c: 16 hrs
Thinner: Bradite Thinner TC34
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
|Choose Your Colour||
RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016
|Choose Pack Size||