Bradite Floor-IT  for faster painted floors, traffic ready in 16 hours. A Hygienic Low Odour Floor System for Schools, Hospitals and Public Buildings. Next Day Delivery.

Bradite Floor-IT is a water based fast air drying high performance acrylic floor coating suitable for light traffic after 16 hours.

Providing your interior and exterior floors with an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance.

A Fast Drying Floor Paint it is ideal for previously painted surfaces and suitably prepared concrete, wood, steel, tarmac and asphalt floors.

High Performance Waterbased Floor Paint it is a no odour hygienic floor coating suitable for light industrial traffic in factories, food and beverage processing plants, schools and hospitals.

Applied by Roller or Brush it is easy to apply with minimal disruption , touch dry in 30 minute and recoatable in one hour. Two to Three coats can be applied in a single shift.

Stock colours are available in a semigloss finish.

Need more colours?

Bradite Floor-IT RAL Classic colour range.

£69.75

Clear

Description

Bradite Floor-IT  for faster painted floors, where speed of completion is a major factor.

A Hygienic floor coating with no odour suitable for light industrial traffic in factories, food and beverage processing plants, schools and hospitals.

Bradite Floor-IT is easy to apply on concrete, metal and asphalt floors, recoatable in one hour. The system can be applied in busy production areas and walkways where speed of completion is a major consideration.

Available in in a range of RAL, British Standard and NCS colours in a semigloss finish for next day delivery.

Waterbased Floor Paint a fast air drying high performance acrylic floor coating suitable for light to medium traffic after 16 hours.

Bradite Floor-IT will give your interior and exterior floors an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance. It is non yellowing and resistant to most stains

A Concrete floor paint which is compatible with most paints including polyurethane, epoxy and chlorinated rubber. Compatability with existing coatings should be confirmed by preparing and painting a test patch. It is ideal for previously painted surfaces and suitably prepared concrete, wood, steel, tarmac and asphalt floors.

Bradite Floor-IT is easy to apply by brush roller or spray with minimal disruption , touch dry in 30 minutes and recoatable in one hour. Two coats may be necessary to achieve full protection of the surface. For application on absorbent substrates a sealer coat should be roller applied thinned 5-10% with water to improve penetration and adhesion to the substrate.

Surface Preparation

Carbon steel: Min St2 (ISO 8501-1).

Concrete: Surface to be clean and dry, free from laitance, oil grease and other contaminants. Non porous or shiny concrete to be vacuum blast cleaned.

Painted surfaces: High pressure water jetting to remove all loose and flaking paint back to a sound substrate. Surface to be free from oil grease and other contaminants.

Technical Data

Download Datasheet

Volume Solids (ISO 3223): 39%

VOC Content: 101 g/lt

Flash point (ISO 3679): non flammable

Dry Film thickness: 40 microns per coat

Wet Film thickness: 100 microns

Theoretical coverage: 12 sq m/lt per coat

Touch Dry 20c: 30 mins

Overcoat 20c: 1 hr

Thinner: water

H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Reviews

There are no reviews yet.

Be the first to review “Bradite Floor-IT Stock Colours”

Your email address will not be published. Required fields are marked *

Related Products