Bradite Floor-IT  for faster painted floors, traffic ready in 16 hours. A Hygienic Low Odour Floor System for Schools, Hospitals and Public Buildings.

Bradite Floor-IT is a water based fast air drying high performance acrylic floor coating suitable for light traffic after 16 hours.

Bradite Floor-IT will give your interior and exterior floors an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance.

Bradite Floor-IT is ideal for previously painted surfaces and suitably prepared concrete, wood, steel, tarmac and asphalt floors.

Bradite Floor-IT is a no odour hygienic floor coating suitable for light industrial traffic in factories, food and beverage processing plants, schools and hospitals.

Bradite Floor-IT is easy to apply with minimal disruption , touch dry in 30 minute and recoatable in one hour.

All RAL, NCS & British Standard colours are available in a semigloss finish. Follow the link to RAL and BS for the full colour range.

£74.50

  • 5ltr
Clear

Description

Bradite Floor-IT  where speed of completion is a major factor.

Bradite Floor-IT is a hygienic floor coating with no odour suitable for light industrial traffic in factories, food and beverage processing plants, schools and hospitals.

Bradite Floor-IT has no odour and is easily applied to concrete, metal and asphalt floors, recoatable in one hour. The system can be applied in busy production areas and walkways where speed of completion is a major consideration. Bradite Floor-IT is available in a range of RAL, British Standard and NCS colours in a semigloss finish.

Bradite Floor-IT is a water based fast air drying high performance acrylic floor coating suitable for light to medium traffic after 16 hours.

Bradite Floor-IT will give your interior and exterior floors an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance. It is non yellowing and resistant to most stains

Bradite Floor-IT is compatible with most paints including polyurethane, epoxy and chlorinated rubber. Compatability with existing coatings should be confirmed by preparing and painting a test patch. It is ideal for previously painted surfaces and suitably prepared concrete, wood, steel, tarmac and asphalt floors.

Bradite Floor-IT is easy to apply by brush roller or spray with minimal disruption , touch dry in 30 minutes and recoatable in one hour. Two coats may be necessary to achieve full protection of the surface. For application on absorbent substrates a sealer coat should be roller applied thinned 5-10% with water to improve penetration and adhesion to the substrate.

Surface Preparation

Carbon steel: Min St2 (ISO 8501-1).

Concrete: Surface to be clean and dry, free from laitance, oil grease and other contaminants. Non porous or shiny concrete to be vacuum blast cleaned.

Painted surfaces: High pressure water jetting to remove all loose and flaking paint back to a sound substrate. Surface to be free from oil grease and other contaminants.

Technical Data

Download Datasheet

Volume Solids (ISO 3223): 39%

VOC Content: 101 g/lt

Flash point (ISO 3679): non flammable

Dry Film thickness: 40 microns per coat

Wet Film thickness: 100 microns

Theoretical coverage: 12 sq m/lt per coat

Touch Dry 20c: 30 mins

Overcoat 20c: 1 hr

Thinner: water

H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Additional information

Brand

Bradite

Choose Your Colour

RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005

Choose Pack Size

5ltr

Related Products