Bradite Floor Paint an Economical Tough Floor coating for Garages, Workshops and Showrooms.
Next Day Home Delivery Service on an Extensive range of RAL & BS Colours.
Bradite Floor Paint is an economical floor paint to seal and colour concrete floors in garages, kitchens, stable yards, factories, walkways and showrooms.
Bradite Floor Paint is a single pack air-drying polyurethane touch dry in two hours.
A Polyurethane Floor Paint it is an economic solution for workspaces subject to pedestrian and medium traffic. It is Hard wearing with good chemical and water resistance.
A Single Pack Polyurethane Paint it is easy to apply on concrete, steel and wooden surfaces by brush or roller , it is touch dry in two hours.
It is available for next day delivery in a wide range of RAL and British Standard colours in a satin finish (50%). Should a higher gloss finish be required consider Jotafloor RapidDry (70-85%)
On porous surfaces the first coat may be thinned 15-20% with TW35 to penetrate the surface and improve adhesion of the subsequent coats. Apply two full coats once the primer coat has been allowed to dry.
On existing painted floors ensure the surface is free from oil, grease and other contaminants. Remove any loosely adhering paint back to a sound surface. Patch prime any exposed areas of concrete before applying two full coats. Take care to follow the technical data for drying and overcoating times.
Bradite Floor Paint is a single pack, high performance polyurethane alkyd floor coating, hard wearing with good chemical and excellent water resistance. It can be applied on concrete, steel and wooden flooring subject to medium traffic.
An Economical Floor Paint it is the ideal selection where the costs is the critical factor. It is easy to apply by roller, it is the most economic floor paint in the Bradite range. It is available in an extensive range of RAL and British Standard colours for next day delivery to your home or workplace.
A Tough Air Drying Floor Paint it is ideal for repainting concrete floors and walkways in garages, workshops, stable yards, factories, kitchens and showrooms. It produces a tough hard wearing and water resistant satin (50%) finish. Should a gloss finish be required the equivalent product is Jotafloor RapidDry (70-85%).
Bradite Floor Paint is suitable for application by Airless spray, Conventional spray, brush or roller. Two coats may be required to achieve the recommended DFT by brush or roller.
Surfaces to be painted should be free of concrete laitance, oil, grease and other contaminants. Power floated, shiny non porous concrete floors should be vacuum blast cleaned to roughen the surface of the concrete.
For application on concrete, wood or other absorbent substrates the first coat can be thinned 15-20% with thinner TW35 prior to applying two full coats. On existing painted floors exposed concrete areas can be touched up before applying two full coats.
While the floor will take light foot traffic after overnight drying, full properties will be achieved after 4 days at 20c and should not be subjected to heavy traffic for at least 48 hours. Take care to follow the technical data for drying and overcoating times.
AVACE is a leading manufacturer of protective coatings for residential and commercial properties. Environmentally compliant coatings to protect metals, concrete, wood , upvc and plastics.
Steelmaster Intumescent paints for fire protection of structural steel. Low odour water based Bradite paints for concrete flooring. High performance exterior durable Bradite One Can and Metal Unicoat for UPVC windows & doors, metal cladding and walls.
Hydrograff Antigraffitti paints for concrete walls and metal facades. Demidekk Ultimate for long term protection of exterior wood buildings, log cabins, decking and fencing.
Elastometal and Elastoflex anticorrosion , anticarbonation and waterproofing for metal roofs and concrete decks and structures.
Carbon steel: Min St2 (ISO 8501-1).
Concrete and Wood: Surface to be clean and dry, free from oil grease and other contaminants
Volume Solids (ISO 3223): 45%
VOC Content: 435 g/lt
Flash point (ISO 3679): 38c
Dry Film thickness: 45 microns
Wet Film thickness: 100 microns
Theoretical coverage: 10 sq m/lt
Touch Dry 23c: 2 hrs
Overcoat 23c: 16 hrs
Nozzle tip: 18 thou Airless Spray, 2mm Conventional
Pressure at nozzle: 2100psi Airless, 60psi Conventional
Thinner: Bradite Thinner TW35
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.