A fast drying high performance two pack water based floor primer and concrete sealer.
Bradite Floor Primer is for power floated concrete, quarry tiles and other absorbent smooth floor surfaces which may require a penetrating primer to improve adhesion of subsequent coatings. Excellent as a floor primer in a system for resistance to abrasion, fork lift traffic and high wear in public places. A low odour floor coating ideal for hygiene sensitive areas, hospitals, food and beverage processing plants.
Bradite Floor Primer is a fast drying, two pack, high performance waterbased epoxy floor primer for power floated concrete, other absorbent smooth floor surfaces and quarry tiles It has low odour and is ideal for hygiene sensitive areas, hospitals, food and beverage plants. Bradite Floor Primer can be recoated in 2-3 hours, application by brush or roller is recommended.
Bradite Floor Primer is applied up to 40 microns per coat, two coats may be required on very porous surfaces to achieve the recommended DFT.
Concrete and Wood: Surface to be clean and dry, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 47%
VOC Content: 2g/lt
Flash point (ISO 3679): 99c
Dry Film thickness: 40 microns
Wet Film thickness: 85 microns
Theoretical coverage: 25 sq m/lt
Touch Dry 23c: 1 hr
Overcoat 23c: 2-3 hrs
Mix Ratio: 2.5:1.5
Pot Life: 1 hr
Thinner: Not Required
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.