Bradite HD Floor & Wall a low odour Abrasion and Chemical resistant Epoxy Floor coating for Hospitals and Food Processing plants.
Bradite HD is a low odour flooring suitable for hygiene sensitive locations found in hospitals, schools, public buildings, food and beverage processing plants.
Bradite HD is a Heavy duty coating recommended for heavy fork lift traffic and walkways with high wear and the possibility of chemical spillages.
It has Excellent resistance to abrasion and mechanical wear Ideal for walls and floors in hospitals, schools, food and beverage processing plants where steam cleaning is common.
Produces a very hard easy-clean surface. It is suitable for internal steel, wood, concrete and other absorbent mineral surfaces free from contamination and effloresence.
Bradite HD is available for delivery next day in a wide range of RAL and British Standard colours in a gloss finish (75%). Where large surface areas are required to be painted consider Hydropoxy as an economic alternative available in RAL and NCS colours.
Contact Us If you require any advice on the most suitable paint for your application.
All RAL Classic colours are available in a gloss finish.
Bradite HD Floor & Wall a two-pack water-based Epoxy coating
Bradite HD Floor and Wall is a two pack, high performance water-based epoxy coating and finish paint for concrete, steel, ceramic and terracotta tiles. It has low odour and is ideal for hygiene sensitive areas, hospitals, food and beverage plants. It has superior resistance to fork lift traffic and chemicals with an easy clean surface. It can be applied by airless or conventional spray, brush or roller.
Bradite HD Floor and Wall Paint is applied up to 57 microns per coat, two coats may be required to achieve the recommended DFT by brush or roller.
Carbon steel: Min Sa 2.5 (ISO 8501-1).
Concrete and tiles: Surface to be clean and dry, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 57%
VOC Content: 2g/lt
Flash point (ISO 3679): 99c
Dry Film thickness: 57 microns
Wet Film thickness: 100 microns
Theoretical coverage: 13 sq m/lt
Touch Dry 23c: 3 hrs
Overcoat 23c: 14 hrs
Mix Ratio: 2:1
Pot Life: 1 hr
Nozzle tip: 18 thou Airless Spray, 2mm Conventional
Pressure at nozzle: 2100psi Airless, 60psi Conventional
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
|Choose Pack Size||