A Fast Drying High Performance high solids single pack hard wearing polyurethane floor coating.
Next Day Delivery on Light Grey and Cardinal Red.
Bradite Rapid is the fastest drying single pack floor system suitable for heavy forklift traffic.
Bradite Rapid is surface dry in 2 hours and traffic ready in 48 hours.
Bradite Rapid is recommended for interior concrete, wood or steel floors.
Bradite Rapid is easy to apply, and a cheaper alternative to two pack epoxy floor paints.
Bradite Rapid is ideal for warehouses, production facilities and showrooms.
Bradite Rapid is a single pack,high solids, high performance moisture cured polyurethane floor coating, hard wearing with good chemical and excellent water resistance. It can be applied on concrete, steel and wooden flooring subject to heavy forklift traffic. Bradite Rapid is traffic ready in 48 hours it is suitable for application by brush or roller. Bradite Rapid will cure as low as -5c.
Bradite Rapid is applied up to 69 microns per coat , two coats may be required to achieve the recommended DFT by brush or roller.
Bradite Rapid is recommended for interior concrete, wood or steel floors requiring a tough, quick drying, hard wearing flexible floor coating. Antislip additives may be included to provide additional underfoot traction.
Bradite Rapid is also available as a clearcoat should only a concrete sealer be required to seal dust and capture the urban appeal.
Bradite Rapid is the fastest drying single pack floor system suitable for heavy traffic. It is a high solids high performance compliant floor coating creating a hard wearing polyurethane gloss finish, suitable for concrete, steel and wood, touch dry in 2 hours and fork lift traffic ready in 48 hours.
Bradite Rapid is an economic alternative to two pack epoxy floor paints which often require longer drying and overcoating intervals, two pack systems also require greater care in mixing and application.
Bradite Rapid is easy to apply by brush or roller and is the ideal flooring system for warehouses, production facilities and showrooms where limited time is available to protect and decorate the floor area and put back into full operational service with minimum disruption.
Carbon steel: Min St2 (ISO 8501-1).
Concrete and Wood: Surface to be clean and dry, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 69%
VOC Content: 276 g/lt
Flash point (ISO 3679): 26c
Dry Film thickness: 69 microns
Wet Film thickness: 100 microns
Theoretical coverage: 10 sq m/lt
Touch Dry 23c: 2 hrs
Overcoat 23c: 8 hrs
Thinner: Bradite Thinner TP33
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
|Choose Your Colour|
Clear, RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016
|Choose Pack Size|