A fast drying waterbased two pack epoxy floor primer
Coovar high performance primer assists the adhesion to difficult floor surfaces, acting as a barrier between old floor paints and new Coovar Profloor coatings. Excellent as a floor primer in a system for resistance to abrasion, fork lift traffic and high wear in public places. A Clear low odour floor coating ideal for hygiene sensitive areas, hospitals, food and beverage processing plants.
Coovar High Performance Floor Primer is a fast drying, two pack, high performance waterbased epoxy floor primer to improve adhesion on difficult floor surfaces or where mechanical abrasion is not possible and chemical etching has to be used. It will act as barrier between old painted surfaces and new Coovar floor systems. Coovar Floor Primer Sealer is excellent as a primer in a system for resistance to abrasion, fork lift traffic and high wear in public buildings. It has low odour and is ideal for hygiene sensitive areas, hospitals, food and beverage plants. Coovar High Performance Floor Primer should be applied above 10c by brush or shortpile roller.
Coovar High Performance Floor Primer is applied up to 45 microns per coat, two coats may be required on very porous surfaces to achieve the recommended DFT.
Concrete: Surface to be clean and dry, free from oil grease and other contaminants.
Power floated or smooth surfaces to be mechanically abraded or acid etched for adhesion.
Volume Solids (ISO 3223): 46%
VOC Content: 10g/lt
Flash point (ISO 3679): Not Applicable
Dry Film thickness: 45 microns
Wet Film thickness: 98 microns
Theoretical coverage: 25 sq m/lt
Touch Dry 20c: 2 hr
Overcoat 20c: 16 hrs
Pot Life: 1-2 hr
Thinner: Clean Water
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
|Choose Your Colour||
|Choose Pack Size||