Jotun Concrete Sealer
£68.25
A fast Drying two pack epoxy concrete sealer coating
Jotun Concrete Sealer is used for priming porous concrete surfaces prior to applying two pack epoxy floor coatings. It may also be used to seal in concrete dust in garages and workshops creating a very durable surface finish, can be applied spray but it is recommended that you use either a brush or a roller. It can also be used as a primer or finish coat in a complete system in atmospheric environments.
Concrete Sealer can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. On porous concrete a thinned (up to 15% by volume) first coat maybe required prior to application of a full coat.
Containers must be kept in a dry, cool, well ventilated space and away from sources of heat and ignition, the tins must also be kept tightly closed. This product has a minimum shelf life of 48 months.
Pack sizes for Concrete Sealer are 5 and 20 litres and are only available in a clear colour.
Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product, a subsequent coat can include epoxy and polyurethane.
It is recommended for factory concrete floors where resistance to heavy forklift traffic and chemical spillage is required. It can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
It is resistant to continuous heat of 120°C in dry, atmospheric environments. It’s peak temperature that it is resistant to in these environments are 140°C and can endure that for a maximum of 1 hour. The temperatures listed relate to retention of protective properties. Aesthetic properties may suffer at these temperatures.
You can read more specifications about the product on the technical data sheet.
Description
Jotun Concrete Sealer is a fast drying two pack, epoxy sealer with excellent penetrating properties.
Jotun Concrete Sealer is suitable for concrete and other masonry surfaces as part of a complete epoxy floor coating system or maybe used as a transparent coating over abrasive blast cleaned concrete.
Penguard Concrete Sealer can be applied by Airless spray, Conventional spray, brush or roller. It is resistant to continuous temperatures of up to 120°C and a peak temperature of 140°C for a maximum of 1 hour in dry and atmospheric environments. The temperatures listed relate to retention of protective properties. Aesthetic properties may suffer at these temperatures.
Jotun Concrete Sealer is a two pack polyamide cured high molecular weight epoxy gloss finish suitable for use in atmospheric environments as a primer in a multicoat system. It is recommended for factory concrete floors where resistance to heavy forklift traffic and chemical spillage is required. It can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. On porous concrete a thinned (up to 15% by volume) first coat maybe required prior to application of a full coat.
It can be used as a primer or finish coat in a complete system in atmospheric environments. This product is only available in 5 and 20 litre packs and in a clear colour.
Containers of Concrete Sealer must be kept in a dry, cool, well ventilated space and away from sources of heat and ignition, the tins must also be kept tightly closed. This product has a minimum shelf life of 48 months.
Surface Preparation
Concrete:
Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants. Low pressure jet washing to a rough, clean dry and laitance free surface. Moisture content not to exceed 5% at the time of sealing
Technical Data
Penguard Concrete Sealer |
Comp A |
Comp B |
Volume Solids (ISO 3223): 44%
VOC Content: 496 g/lt
Flash point (ISO 3679): 25c
Dry Film thickness: 30-50 microns
Wet Film thickness: 70-115 microns
Theoretical coverage: 14.7-8.8 sq m/lt
Mix Ratio: 4:1
Pot Life 23c: 8 hrs
Touch Dry 23c: 60-90 mins
Overcoat 23c: 4-6 hrs
Nozzle tip: 13-18 thou
Pressure at nozzle: 2100psi
Thinner: No. 17
H&S: Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.
Reviews
There are no reviews yet.