Jotun Epoxy HR a two pack epoxy phenolic heat resistant primer finish

withstanding up to 205c, it may be applied on hot steel up to 150c. It can be applied onto carbon steel, aluminium, galvanised and stainless steel. It is prequalified to Norsok System M-501 system 6 and is an ideal heat resistant coating to protect pipes and equipment where long corrosion protection is required. It is suitable for insulated and non insulated surfaces.

£48.75

  • 5ltr
  • 18.8ltr
Clear

Description

Epoxy HR is a two pack, high solids phenolic epoxy coating with very good heat resistance up to 200c and can be applied direct to hot surfaces up to 150c. Epoxy HR Heat Resistant  Paint is a matt heat resistant paint which can be used as a primer midcoat or a finish in atmospheric environments applied by Airless spray, Conventional spray or brush. Epoxy HR Heat Resistant Paint is prequalified to Norsok system 6.

Epoxy HR can be applied direct to carbon steel, stainless steel, galvanised steel and aluminium. It is recommended as corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is required. Epoxy HR Heat Resistant Paint is suitable for insulated and non insulated surfaces, pipes and vessels. It can be applied up to 200 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by roller or brush.

Surface Preparation

Carbon Steel:  Minimum St 2 (ISO 8501-1)
Galvanised steel:  Surface to be clean and dry with a rough dull surface
Aluminium, Stainless:  Surface to be clean and dry, abrade with non metallic abrasives or pads

Technical Data

Epoxy HR
Download Datasheet
Epoxy HR Comp A
Download Datasheet
Epoxy HR Comp B
Download Datasheet

Volume Solids (ISO 3223):  63%
VOC Content:  236 g/lt
Flash point (ISO 3679):  28c
Dry Film thickness:  100-200 microns
Wet Film thickness:  160-320 microns
Theoretical coverage:  6.3-3.2 sq m/lt
Mix Ratio:  6.5:1
Pot Life 23c:  4 hrs
Touch Dry 23c:  4 hrs
Overcoat 23c:  10 hrs
Nozzle tip:  17-21 thou
Pressure at nozzle:  2100psi
Thinner:  No. 17
H&S:  Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.

Additional information

Brand

Jotun

Choose Your Colour

Aluminium(9006), Grey(7035)

Choose Pack Size

5ltr, 18.8ltr

Related Products