Jotun Penguard HSP ZP High Build Zinc Phosphate Epoxy Primer

High Build High Solids two pack Epoxy Zinc Phosphate Anticorrosion Primer. Fast Drying and Overcoating for increased productivity Protecting Steel Fabrications.

The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser. All products are manufactured on computer controlled tinting machines matched to the official colour standards. Once manufactured orders cannot be cancelled or refunded.

Jotun Penguard HSP ZP High Build Zinc Phosphate Epoxy Primer

Jotun Penguard HSP ZP A fast drying anticorrosion primer for steel fabrications suitable for Corrosion Protection in Aggressive C5-M Marine and Heavy Industrial C4 Environments.Penguard HSP ZP is an economic high build epoxy primer for steel fabrications. The first coat in a system providing up to 25 years corrosion protection in C5-M Coastal and Industrial environments. Overcoated with Penguard Epoxy Intermediates and Hardtop Polyurethanes for long term colour and protection. Penguard HSP ZP is a fast drying zinc phosphate primer which is touch dry in one hour and can be overcoated in two hours. It is specially designed for new construction where short dry to handle and overcoating times are required for rapid processing. It is suitable for use as a primer or intermediate coat in aggressive C5M environments on carbon steel. An anticorrosion fast drying two pack epoxy primer it is ideal for steel fabrications in industrial, petrochemical and waste water industries. It may be used on agricultural and commercial equipment in addition to other steel fabrication processes. It is recommended for offshore locations, bridges, buildings and mining equipment.
Prequalified for use in Norsok M-501 Rev 5, system 1 and is certified for use as an anticorrosion primer for Intumescent Steelmaster systems. It is available in 20lt packs in Buff, Red and Grey for free delivery throughout the UK.

  • High Build High Solids twp pack Epoxy Zinc Phosphate Primer. Upto 25 Yrs Corrosion Protection on Steel Fabrications in Aggressive C5-M Marine and Heavy Industrial C4 Environments.
  • An economic high build epoxy primer for Steel Fabrications. Fast drying and overcoating properties for rapid handling. Touch dry in 1 Hr. Ideal Anticorrosion primer for Steel Columns and Beams . Fire Approved. for use under Steelmaster Intumescent Paints.
  • High Coverage rates. Available from stock in Buff, Grey and Red. Free Fast Delivery throughout the UK. Overcoated with Hardtop Polyurethanes for long term Exterior Durability, Colour & Protection.

Technical Credentials

High build Anticorrosion 2 pack epoxy zinc phosphate primer.

High volume solids 73%.

Matt finish.

Dry Film Thickness 60-250 microns.

Theoretical Coverage 7.3 m2/lt (100 mics).

Surface Dry 1hr @ 23c

Overcoat 2hrs @ 23c

Pot Life 2 hrs @ 23c

Apply by Airless spray, roller or brush.

Thinner No. 17

VOC 264 g/lt

Surface Preparation

Carbon Steel: Minimum St 2 , Recommended Abrasive blast clean to Sa 2.5. (ISO 8501-1) Coated Surfaces: Ensure the existing coat is intact, compatible, dry and free from oil grease and other contaminants. Download the technical data sheet for more information.

Download the technical data sheet for more information.

Penguard HSP ZP is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate high solids, high build product. Specially designed for new construction where short dry to handle and over coating times are required. To be used as primer in atmospheric environments. Suitable for properly prepared carbon steel substrates exposed in highly corrosive C5-M and Heavy Industrial environments.

Penguard HSP ZP is an economic high build epoxy primer for steel fabrications. The first coat in a system providing up to 25 years corrosion protection in aggressive C5-M Marine and Heavy Industrial environments. Overcoated with Penguard Epoxy Intermediates and Hardtop Polyurethanes for long term colour and protection. Hardtop XP is the most popular two pack polyurethane topcoat, it is an economic high gloss finish with excellent chemical and mechanical resistance and excellent colour and gloss retention in an exterior environment.

This fast drying zinc phosphate epoxy primer is touch dry in one hour and can be overcoated in two hours. It is specially designed for new construction where short dry to handle and overcoating times are required for rapid processing.

Penguard HSP ZP two pack epoxy primer is ideal for steel fabrications in petrochemical , industrial and waste water industries. It may be used on agricultural and commercial equipment in addition to other steel manufacturing production. It is recommended for offshore locations, bridges, buildings and mining equipment.

It is prequalified for use in Norsok M-501 Rev 5, system 1 and is certified for use as an anticorrosion primer for Intumescent Steelmaster systems. Resistant to continuous temperatures of up to 120°C and peak temperatures of 140°C

This high build high solids epoxy primer can be applied by Airless spray up to 250 microns in a single coat. Two coats may be required by brush to achieve the recommended film thickness for corrosion resistance.

Penguard HSP and HSP ZP is available in 20lt packs in Buff, Red and Grey for free delivery throughout the UK.