Jotun Pilot II Marine Brushing Enamel
High Gloss Marine Brushing Enamel for Exterior and Interior use. Certified not to spread Surface Flames. Ideal as a Topcoat above the waterline on Topsides and Superstructures. Ideal all purpose maintenance High Gloss paint.
The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser. All products are manufactured on computer controlled tinting machines matched to the official colour standards. Once manufactured orders cannot be cancelled or refunded.
Jotun Pilot II Marine Brushing Enamel
Jotun Pilot II a high gloss marine brushing enamel suitable for Concrete, Wood and Metals and is ideal as a high gloss finish over previously painted surfaces. It is easy to apply by brush and roller to produce a smooth glossy finish in an extensive range of colours. It may be applied over existing painted surfaces or used in conjunction with Pilot QD primer for anticorrosion protection on steel. Pilot II has excellent water resistance and exterior durability with good colour and gloss retention, a marine quality paint suitable for coastal environments. It is certified not to spread surface flames. Available in RAL and British standard colours in 5lt and 20lt packs for free delivery throughout the UK.
Technical Credentials.
Marine Alkyd Air Drying Brushing Enamel.
High Volume Solids 48%.
High Gloss Finish.
Dry Film Thickness 30-50 microns.
Theoretical Coverage 12 m2/lt (40 mics.)
Surface Dry 3 hrs @ 23c.
Overcoat 16hrs @ 23c.
Apply by Airless Spray, Roller or Brush.
Thinner No. 7.
VOCs 410 g/lt.
Surface Preparation.
Carbon Steel: Prime with Pilot QD Zinc Phosphate Primer.
Coated Surfaces: Ensure the existing coat is intact, compatible, dry and free from oil grease and other contaminants.
Download the technical data sheet for more information.
Pilot II is a Marine quality single pack air drying high gloss brushing alkyd with good gloss retention. It can be applied as a topcoat in atmospheric environments. Suitable for application by Airless spray, Conventional spray, brush or roller.
Pilot II is part of a system certified not to spread surface flame. It is suitable for wood, steel, GRP and previously painted surfaces in an atmospheric environment. Pilot II has very good colour retention and durability in a marine environment and is available in a wide range of RAL and British standard colours in a high gloss finish.
It is recommended as a Marine topcoat for engines, topside, deck and superstructure. It may also be used as a brushing topcoat for the maintenance of steel structures, modular buildings, construction equipment and existing painted surfaces. On bare steel it is recommended to prime with Plot QD zinc phosphate primer, it may also be applied to most aged coatings. It can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 120°C.
It is available in 5lt and 20lt packs for free delivery throughout the UK.
