Jotun Pilot QD a single pack fast air drying zinc phosphate high build primer for steel
Pilot QD is designed for new construction and maintenance of steel. It can be applied by brush , roller or spray and is certified for use as a primer in Intumescent Steelmaster fire protection systems.
Pilot QD Primer is a fast air drying zinc phosphate anticorrosion primer with a matt finish, providing fast handling and overcoating times to increase productivity. It can be applied direct to steel, aluminium and wood by Airless spray, Conventional spray, brush or roller.
Pilot QD Primer is recommended for steel structures and containers, modular buildings, construction equipment and building products. Pilot QD Zinc Phosphate Primer provides excellent adhesion to steel and may be used when abrasive blast cleaning is not possible. Jotun Pilot QD Zinc Phosphate Primer can be applied up to 125 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 120°C
Carbon steel: Min St2 (ISO 8501-1).
Aluminium: Abrade to provide a rough surface. Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 56%
VOC Content: 390 g/lt
Flash point (ISO 3679): 26c
Dry Film thickness: 40-125 microns
Wet Film thickness: 70-220 microns
Theoretical coverage: 14-4.5 sq m/lt
Touch Dry 23c: 15 mins
Overcoat 23c: 90 mins
Nozzle tip: 15-21 thou
Pressure at nozzle: 2100psi
Thinner: No. 7
H&S: Observe the precautionary information on the container. Refer to MSDS for full health and safety details and storage regulations.
|Choose Your Colour||
Grey(7012), Red(3009), White(9010)
|Choose Pack Size||