Jotun Seaforce 30 M a high solids hydrolysing self polishing antifouling based on ion exchange technology.
To be used in immersed environments only, suitable on approved primers and tie coats on aluminium and carbon steel substrates.It can be applied at sub zero temperatures. Recommended for under water hull in drydocking, designed for vessels trading at a wide range of speed and activity. Seaforce 30M can be used for long service periods up to 60 months as part of a complete coating sysem. Only available to professionals contact Avace for more information.
Call for Price
Jotun SeaForce 30 M is a high solid hydrolysing antifouling coating based on ion exchange technology providing good fouling protection.This is achieved by self polishing characteristics reducing hull deterioration. SeaForce 30 M is a topcoat to be used in immersed environments only. SeaForce 30 M is suitable on approved primers and tiecoats on aluminium and carbon steel substrates for vessels operating in global service and is recommended for deep sea trade. SeaForce 30 M is designed for vessels trading at a wide range of speed and activity. SeaForce 30 M antifouling paint can be used for long service periods up to 60 months as part of a complete coating system over Jotamastic 87 or Penguard HB Primer and Vinyguard Silvergrey tiecoat.
SeaForce 30 M can be applied by Airless spray, Conventional spray, brush or roller although two coats may be required to achieve the recommended dry film thickness. It can be applied at sub zero surface temperatures.
Coated Surfaces: Remove any contamination that could interfere with the intercoat adhesion. Use high pressure water jetting to remove loosely adhering paint back to a sound surface at a minimum nozzle pressure of 340 bar. Exceeding maximum recoat intervals will require cleaning and abrading prior to repainting.
Volume Solids (ISO 3223): 62%
VOC Content: 351 g/lt
Flash point (ISO 3679): 27c
Dry Film thickness: 75-175 microns
Wet Film thickness: 120-275 microns
Theoretical coverage: 8.4-3.6 sq m/lt
Touch Dry 23c: 30 mins
Overcoat 23c: 7 hrs
Nozzle tip: 21-31 thou
Pressure at nozzle: 2100psi
Thinner: No. 7
H&S: Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.