A high solids hydrolysing self polishing antifouling based on Polymeric Plasticizer technology.

Jotun Seaforce 60M is recommended for vessels operating in global service with dry docking intervals up to 36 months on vertical sides and 60 months on the flatbottom. Compliant with IMO Antifouling System Convention AFS/CONF/26. Only available to professionals contact Avace for more information.

Call for Price

Description

Jotun SeaForce 60 is an air drying hydrolysing antifouling coating based on ion exchange technology providing good fouling protection.This is achieved by self polishing characteristics reducing hull deterioration. SeaForce 60 is a topcoat to be used in immersed environments only. SeaForce 60  is suitable on approved primers and tiecoats on aluminium and carbon steel substrates for vessels operating in global service, including fresh water exposure during newbuilding outfitting and is recommended for deep sea trade. SeaForce 60 is designed for vessels trading at a wide range of speed and activity. SeaForce 60 antifouling paint can be used for long service periods up to 60 months as part of a complete coating system over Jotamastic 87 or  Penguard HB Primer and Vinyguard Silvergrey tiecoat

SeaForce 60 can be applied by Airless spray, Conventional spray, brush or roller although two coats may be required to achieve the recommended dry film thickness. It can be applied at sub zero surface temperatures.

Surface Preparation

Coated Surfaces:  Remove any contamination that could interfere with the intercoat adhesion. Use high pressure water jetting to remove loosely adhering paint back to a sound surface at a minimum nozzle pressure of 340 bar. Exceeding maximum recoat intervals will require cleaning and abrading prior to repainting.

Technical Data

Download Datasheet Download Datasheet

Volume Solids (ISO 3223):  58%
VOC Content:  399 g/lt
Flash point (ISO 3679):  28c
Dry Film thickness:  75-175 microns
Wet Film thickness:  130-300 microns
Theoretical coverage:  7.7-3.3 sq m/lt
Touch Dry 23c:  30 mins
Overcoat 23c:  7 hrs
Nozzle tip:  21-31 thou
Pressure at nozzle:  2100psi
Thinner:  No. 7
H&S:  Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.

Additional information

Brand

Jotun

Choose Your Colour

Red(3009)

Choose Pack Size

20ltr

Related Products