Jotun Steelmaster 60SB a fast drying thin film CE Marked solvent based intumescent coating.

Steelmaster 60SB is a single pack, high solids, solvent based acrylic thin film intumescent coating independently approved for 60 minutes fire protection of structural steel exposed to cellulosic fire

Steelmaster 60SB is CE marked product with European Technical Assessment ETA-13/1035. It meets the requirements of BS476 part 20/21 and EN 13381-8

Steelmaster 60SB has low VOCs and is specially designed as passive fire protection for steel constructions internally or externally up to corrosivity category C3 (ISO 12944-2)

Steelmaster 60SB can be used as a midcoat or finish coat in atmospheric environments for carbon steel structures it should be applied on approved primers, such as Pilot QD or Penguard Express.

Steelmaster 60SB is supported with a free estimation service available to calculate the  loading requirements to achieve the required fire protection

£194.99

  • 20ltr
Clear

Description

Steelmaster 60SB is a single pack, high solids, solvent based acrylic thin film intumescent coating independently approved for 60 minutes fire protection of structural steel exposed to cellulosic fire.

Steelmaster 60SB can be used as a midcoat or finish coat in atmospheric environments and for carbon steel structures should be applied on approved primers  such as Pilot QD or Penguard Express.

Steelmaster 60SB Intumescent Paint  is CE marked product with European Technical Assessment ETA-13/1035. It meets the requirements of BS476 part 20/21 and EN 13381-8.

Steelmaster 60SB Intumescent Paint  is specially designed as passive fire protection for steel constructions, it is suitable for structural steel to be used internally or externally up to corrosivity category C4 (ISO 12944-2).

Steelmaster 60SB Intumescent Paint  can be applied up to 740 microns by airless spray. Brush or roller application is only recommended for stripe coating and small areas,  multicoats may be required to achieve the recommended DFT.

Steelmaster 60SB Intumescent Paint may be overcoated with any approved topcoat such as Pioner Topcoat or Hardtop CA  available in a wide range of RAL or BS Colours.

A free estimation service is available to calculate loading requirements to achieve the required fire protection. E mail the drawings with steel section dimensions to Avace for confirmation of the theoretical coverage rates. Include appropriate loss factors, such as overspray and spillage when calculating your actual requirements.

Surface Preparation

Primed Steel surfaces: Clean, Dry and undamaged compatible coating (ISO 12944-4 6.1.4). Surface to be free from oil grease and other contaminants.

Technical Data

Download DatasheetDownload Datasheet

Volume Solids (ISO 3223): 74%
VOC Content: 346 g/lt
Flash point (ISO 3679):  25c
Dry Film thickness: 200-740 microns
Wet Film thickness: 270-1000 microns
Theoretical coverage: Submit drawings for free estimates.
Touch Dry 23c: 30 mins
Overcoat 23c: 8 hrs
Nozzle tip: 19-23 thou
Pressure at nozzle: 2900psi
Thinner: Ready for use. Do not thin

H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Additional information

Brand

Jotun

Choose Your Colour

White(9010)

Choose Pack Size

20ltr

Related Products