RD Coatings Elastodeck an Elastomeric Waterproofing system for the renovation of flat roofs and shingles.
Elastodeck has greater than 200% elasticity and excellent waterproofing properties.
A Concrete Deck Paint that requires no abrasive blast cleaning, simply prepare the surface using high pressure water jetting.
Elastodeck is recommended for the maintenance of concrete balconies and flat roofs.
A Waterbased elastomeric concrete protection paint it is an advanced environmentally compliant technology with zero solvent emissions and low odour.
It can be tinted to an extensive range of RAL and NCS colours or available in the following stock colours.
RD Coatings Elastodeck is a fast drying single pack waterbased styrene acrylic waterproofing primer finish for flat roofs, balconies and shingles. It has high elasticity >200% over a broad temperature range. It is exterior durable and can be applied by Airless spray, brush or roller on concrete, cement, old bitumen, wood, weathered supple PVC and EPDM over one year old. .
Elastodeck is a single pack primer finish a cost effective solution for the waterproofing of flat roofs and balconies. On flat roofs it must be reinforced with RD Roof Fleece. For application direct onto bituminous substrates older than one year two coats should be applied by airless spray, brush or roller. For balconies exposed concrete should be primed with a thinned down coat (25% by volume), followed by two coats reinforced with RD Roof Fleece. A topcoat of Hydrograff HP should be applied for increased abrasion resistance.
Concrete and Brick: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Exposed masonry: Cracks to be filled with cement filler and prime with Unifix impregnation primer.
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 55%
VOC Content: 7 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 350 microns
Wet Film thickness: 635 microns
Theoretical coverage: 1.5-3Kq/sq m to completely cover the roof fleece
Touch Dry 23c: 3 hrs
Overcoat 23c: 24 hrs
Nozzle tip: 18-23 thou
Pressure at nozzle: 2100psi,
Thinner: Water for airless spray only (3%)
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.