RD Coatings Hydro Epoxy
RD Coatings Hydro Epoxy an Economic Low Odour Waterbased two Pack Epoxy Wall and Floor paint for Hospitals, Food Processing Plants, Production Units and Public Buildings.
RD Hydro Epoxy is a waterbased low odour flooring suitable for hygiene sensitive locations providing a tough durable floor coating exposed to heavy fork lift traffic.
RD Hydro Epoxy is recommended for high wear walkways, busy production units, food and beverage processing plants, schools and hospitals.
A Low Odour two pack Epoxy Floor Paint it has excellent resistance to mechanical abrasion and spillages of oils and solvents.
RD Hydro Epoxy is ideal as an easy clean hygiene coating for hospitals, schools and approved for food and beverage processing plants.
RD Hydro Epoxy is available in a wide range of RAL colours in a satin (50%) finish for free delivery throughout the UK. It is easy to apply by spray, brush or roller. Available in 4KG and 20KG pack sizes.
RD Hydro Epoxy can be applied onto walls or floors to produce a very hard easy clean surface touch dry in 8 hrs, overcoatable in 12hrs and full service in 72 hrs. Two coats of 100 microns dft are recommended on concrete floors, the first coat can be thinned up to 10% with water to seal the concrete.
Ideal as an economic two pack Epoxy Floor system for large warehouses and distribution centres on commercial contracts.
RD Coatings Hydro Epoxy is a High Performance waterbased satin (50%) two pack epoxy coating which can be applied onto concrete, brick and tiles for internal flooring. It is available in a wide range of RAL and in 4KG and 15 KG pack sizes.
Hydro Epoxy Floor and Wall Paint is very hard easy clean surface and has excellent abrasion resistance and is resistant to solvents and chemicals. It is approved for use in the food industry.
RD Coatings Hydro Epoxy Paint is recommended for use as a primer sealer coat in garages, indoor carparking, workshops, shopping centres, drainage channels and water storage tanks. On porous concrete the first coat should be thinned 10% with water prior to application of the second colour coat. Standard concrete can be applied as two unthinned coats. It can be applied up to 100 microns dft in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
Green concrete: Use Hydropox H as a primer sealer.
Porous concrete: Thin 10% by volume with water. Surface to be clean, free of oil grease and other contaminants.
Brick and Tiles: Surface to be clean, free of oil grease and other contaminants.
|| Comp A
|| Comp B
Volume Solids (ISO 3223): 50%
VOC Content: 0 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 100 microns
Wet Film thickness: 200 microns
Theoretical coverage: 5 sq m/lt
Mix Ratio: 4:1
Pot Life 23c: 2 hrs
Touch Dry 23c: 8 hrs
Overcoat 23c: 24 hrs
Nozzle tip: 21-23 thou
Pressure at nozzle: 2100psi
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.