RD Coatings Hydro Epoxy a waterbased two pack epoxy wall and floor paint
RD Hydro Epoxy is a waterbased low odour flooring suitable for hygiene sensitive locations.
RD Hydro Epoxy is recommended for heavy fork lift traffic and high wear walkways.
RD Hydro Epoxy has excellent resistance to abrasion and spillages of oils and solvents.
RD Hydro Epoxy is ideal for hospitals, schools and approved for food and beverage processing plants.
RD Hydro Epoxy is available in a wide range of RAL and NCS colours in a satin finish.
RD Hydro Epoxy can be applied onto walls or floors to produce a very hard easy clean surface.
For sale to Professional contractors only.
£61.80
Description
RD Coatings Hydro Epoxy is a High Performance waterbased satin two pack epoxy coating which can be applied onto concrete, brick and tiles for internal flooring. Hydro Epoxy Floor and Wall Paint is very hard easy clean surface and has excellent abrasion resistance and is resistant to solvents and chemicals. It is approved for use in the food industry.
RD Coatings Hydro Epoxy Paint is recommended for use as a primer sealer coat in garages, indoor carparking, workshops, shopping centres, drainage channels and water storage tanks. On porous concrete the first coat should be thinned 10% with water prior to application of the second colour coat. Standard concrete can be applied as two unthinned coats. It can be applied up to 100 microns dft in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
Surface Preparation
Green concrete: Use Hydropox H as a primer sealer.
Porous concrete: Thin 10% by volume with water. Surface to be clean, free of oil grease and other contaminants.
Brick and Tiles: Surface to be clean, free of oil grease and other contaminants.
Technical Data
Hydropox![]() |
Comp A![]() |
Comp B![]() |
Volume Solids (ISO 3223): 50%
VOC Content: 0 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 100 microns
Wet Film thickness: 200 microns
Theoretical coverage: 5 sq m/lt
Mix Ratio: 4:1
Pot Life 23c: 2 hrs
Touch Dry 23c: 8 hrs
Overcoat 23c: 24 hrs
Nozzle tip: 21-23 thou
Pressure at nozzle: 2100psi
Thinner: Water
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
Additional information
Brand | RD Coatings |
---|---|
Choose Your Colour | Clear, RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016 |
Choose Pack Size | 4kg, 15kg |