A High Performance two pack waterbased Antigraffiti Polyurethane Hygiene Easyclean coating for Hospitals.
RD Coatings Hydrograff HP has excellent chemical, mechanical and abrasion resistance. It is recommended for use as an antigraffiti coating on concrete walls , brick and steel structures. For sale to Professional contractors only. An easy to clean low odour coating which is approved for use in food and beverage production facilities, ideal for hygiene sensitive areas, hospitals and public buildings drying to produce a hard easy clean surface. Available in a clearcoat and a wide range of RAL and NCS colours in gloss and matt finish.
Avace Hydrograff HP is a High Performance waterbased two pack aliphatic polyurethane hard coating with excellent abrasion and chemical resistance. It can be applied by Airless spray, brush or roller on steel, concrete, wood and plastics. It is an Antigraffiti coating available in high gloss and matt suitable for concrete or steel walls.
Avace Hydrograff HP is a two pack topcoat recommended for use in aggressive marine environments when applied over Avace Monoguard. It is recommended for offshore environments, structural steel, building products, construction and agricultural equipment. It may be used as a floor coating and is approved for use in the food industry. It can be applied up to 100 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
Carbon Steel: Minimum St2 (ISO 8501-1), no abrasive blast cleaning required.
Galvanised steel: Surface to be clean and dry with a rough dull surface
Aluminium: Surface to be clean and dry, abrade with non metallic abrasives or pads
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
|COMPOSANT A:||COMPOSANT B:|
Volume Solids (ISO 3223): Clear 40%, Tinted 50%
VOC Content: 20 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 50 microns
Wet Film thickness: 128 microns
Theoretical coverage: 7.80 sq m/lt
Mix Ratio: 4:1
Pot Life 23c: 2 hrs
Touch Dry 23c: 3 hrs
Overcoat 23c: 8 hrs
Nozzle tip: 7-9 thou
Pressure at nozzle: 2100psi, 34psi (HVLP or Pressure pot)
H&S: Observe the precautionary information on the container. Refer to MSDS for full health and safety information and storage regulations.
|Choose Your Colour|
Clear, RAL1003, RAL1015, RAL1021, RAL1023, RAL2004, RAL2008, RAL3002, RAL3020, RAL5002, RAL5010, RAL5024, RAL6005, RAL6019, RAL6029, RAL7016, RAL7046, RAL8019, RAL9005, RAL9010, RAL9016
|Choose Pack Size|