RD Coatings Metal Unicoat Stock Colours
RD Coatings Metal Unicoat Stock Colours a fast air drying surface tolerant water based primer finish for steel cladding
Metal Unicoat Stock Colours has excellent colour retention and durability for metal cladding, structural steelwork and equipment.
A surface tolerant high performance cladding paint requiring no abrasive blast cleaning, simply prepare the surface using high pressure water jetting.
Metal Unicoat is recommended as a primer finish for cladding, weathered galvanised steel, plastisol, metal facades and structures.
Metal Unicoat is an advanced environmentally compliant waterbased technology with low emissions and low odour. It may be applied during normal business operations with the minimum disruption.
This unique cladding paint can be tinted to RAL or NCS colours, stock colours are available in white and grey in a satin finish.
RD Coatings Metal Unicoat has excellent colour retention and durability for cladding, multisurfaces, structural steelwork and equipment without the need for abrasive blast cleaning. Metal Unicoat is environmentally compliant with low VOCs and low odour. It is recommended as a primer finish for cladding, weathered galvanised steel, plastisol, metal facades and structures, it is available in a wide range of RAL and NCS colours in a satin finish.
This fast drying Cladding Paint is a single pack waterbased anticorrosion coating with good exterior durability without the need for abrasive blast cleaning on cladding. It can be applied by Airless spray, brush or roller on all types of metal cladding. A single coat is recommended over previously painted surfaces for a refreshing of the surface, two coats are recommended for long term corrosion protection on cladding.
Metal Unicoat Cladding Paint is a single pack primer finish an effective solution for the renovation of metal facades, cladding and structural steel. It may be applied to steel, cast iron, weathered galvanised steel sheets, plastisol and polyester powder coated sheet. Metal Unicoat Primer Finish is a cost effective solution when renovating warehouses, factories, roofing and cladding. It can be applied up to 70 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 80°C
Carbon Steel: Minimum St2 (ISO 8501-1), no abrasive blast cleaning required.
Galvanised steel: Surface to be clean and dry with a rough dull surface
Aluminium: Surface to be clean and dry, abrade with non metallic abrasives or pads
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 47%
VOC Content: 60 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 70 microns
Wet Film thickness: 150 microns
Theoretical coverage: 6.7 sq m/lt
Touch Dry 23c: 2 hrs
Overcoat 23c: 4 hrs
Nozzle tip: 13-15 thou
Pressure at nozzle: 2100psi, 34psi (HVLP or Pressure pot)
Thinner: Water for airless spray only (3%)