RD Coatings Monoguard Stock Colours

£79.75

Monoguard a Fast Air Drying High Performance Water based Direct to Metal primer finish suitable for Aggressive Marine & Industrial Environments.

Monoguard has excellent colour retention and corrosion resistance in aggressive  C5-M coastal and industrial environments with a life expectancy of 15 years.

Monoguard requires no abrasive blast cleaning, prepare the surface using high pressure water jetting.

This fast drying anticorrosion paint is a single product solution, a primer finish in one product. Upto three coats can be applied in a single shift for increased productivity.

Monoguard is recommended for the renovation of metal cladding, structural steel and equipment in aggressive industrial and marine locations.

This advanced environmentally compliant waterbased paint technology has low emissions and low odour.

It is a primer finish available from stock for next day delivery in white and black and can be tinted to a range of RAL Classic and NCS colours in a satin (70%) finish.

SKU: N/A Categories: ,

Description

Monoguard has excellent colour retention and corrosion resistance for cladding, multisurfaces, structural steelwork and equipment without the need for abrasive blast cleaning.

This high performance anticorrosion paint is environmentally compliant with low VOCs and odour, ideal for hygiene sensitive locations. It is recommended as a primer finish for C5-M coastal and heavy industrial environments and is available in a wide range of RAL and NCS colours in a semigloss (70%) finish.

Monoguard is a High Performance (15yrs) fast drying single pack waterbased anticorrosion primer finish with good exterior durability without the need for abrasive blast cleaning on steel. It can be applied by Airless spray, brush or roller on steel, CorTen steel, cast iron, aluminium, stainless and galvanised steel. A single coat of this primer finish is recommended over weathered galvanised steel and previously painted surfaces. Two to three coats are recommended for long term corrosion protection on steel in C5M environments (1400hrs salt spray ASTM).

Monoguard Primer Finish is recommended for use in aggressive marine environments and a high gloss finish can be achieved when overcoated with Hydrograff HP as a two coat system. It is recommended for offshore environments, structural steel, building products, cladding,  construction and agricultural equipment.

This fast drying anticorrosion paint can be applied up to 100 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 80°C

Surface Preparation

Carbon Steel: Minimum St2 (ISO 8501-1), no abrasive blast cleaning required.

Galvanised steel: Surface to be clean and dry with a rough dull surface

Aluminium: Surface to be clean and dry, abrade with non metallic abrasives or pads

Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.

Technical Data

SG
Download Datasheet
Clear
Download Datasheet
Download Datasheet

Volume Solids (ISO 3223): 43%

VOC Content: 45 g/lt

Flash point (ISO 3679): Non Flammable

Dry Film thickness: 100 microns

Wet Film thickness: 233 microns

Theoretical coverage: 4.3 sq m/lt (for 200 µ dry)

Touch Dry 23c: 2 hrs

Overcoat 23c: 4 hrs

Nozzle tip: 7-9 thou

Pressure at nozzle: 2100psi, 34psi (HVLP or Pressure pot)

Thinner: Not required, clean equipment with water

H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.

Reviews

There are no reviews yet.

Be the first to review “RD Coatings Monoguard Stock Colours”

You may also like…