Avace Multiprim a fast drying single pack waterbased acrylic adhesion primer for multisurfaces
Avace Multiprim has excellent adhesion to most surfaces Suitable for use internally and externally without the need for abrasive blast cleaning. It can be applied by Airless spray, brush or roller on all types of metals, plastic and glass.
RD Coatings Multiprim is a fast drying single pack waterbased acrylic adhesion primer with excellent adhesion to most surfaces. Suitable for use internally and externally without the need for abrasive blast cleaning. It can be applied by Airless spray, brush or roller on all types of metals, plastic and glass.
RD Coatings Multiprim is a single pack multisurface primer finish without the need for surface preparation. Multiprim Multisurface Primer may be applied to stainless steel, new galvanised steel, aluminium, copper, hard PVC, gypsum, cement and concrete. Multiprim Multisurface Primer Paint can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 80°C
All surfaces: Surface to be clean and dry and free of dust and other contaminants.
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 40%
VOC Content: 40 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 50 microns
Wet Film thickness: 125 microns
Theoretical coverage: 8 sq m/lt
Touch Dry 23c: 1 hrs
Overcoat 23c: 4 hrs
Nozzle tip: 11-15 thou
Pressure at nozzle: 2100psi,
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.