Selemix Direct UPVC & Metal Cladding Paint (Base + Hardener)
A High Performance Fast drying two pack Polyurethane for Metal Cladding , UPVC Windows & Doors. Also Ideal on Glass Kitchen Splashbacks.
The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser. All products are manufactured on computer controlled tinting machines matched to the official colour standards. Once manufactured orders cannot be cancelled or refunded.
Selemix Direct UPVC & Metal Cladding Paint (Base + Hardener)
Selemix Direct a High Performance fast drying two pack Polyurethane for UPVC Windows & Doors. Also Ideal on Glass Splashbacks in Kitchens.Excellent Exterior Durability & Adhesion. A Direct to Substrate Primer Finish ideal for Plastics, Aluminium, Glass and Galvanised Steel. Available as a pack including Base & Hardener. It is a unique multisurface paint suitable for UPVC Windows & Doors, Rainwater products, Building plastics, aluminium, metal cladding, glass and galvanised steel. Selemix Direct is a high performance, high build, one coat, two pack polyurethane primer finish with excellent durability, colour and gloss retention. It is recommended for C5-M environments suitable for UPVc windows and doors, glass facades, metal cladding, commercial and agricultural equipment in the most extreme environments. A single product solution, a primer finish applied wet on wet to achieve high film builds. It can be over-coated after 15 minutes flash off between coats enabling high build finishes in the minimum of time.Available in 10%, 30%, 50% and 80% gloss in an extensive range of RAL and British standard colours. Available as a pack including Base and Hardener for ease of mixing. Free delivery throughout the UK.
For small projects Selemix Direct may also be purchased as Base Colour only in 1lt small packs. Direct Hardener 9-070 can also be purchased seperately in 1lt and 5lt packs.
Technical Credentials.
Two Pack Polyurethane Primer Finish.
High Volume Solids 68%.
All Gloss Levels.
Dry Film Thickness 80-100 microns.
Theoretical Coverage 4.5 m2/lt (80 mics.)
Surface Dry 1hr @ 20c.
Overcoat Wet on Wet 30 mins @ 20c.
Pot Life 3 hrs @ 20c.
Apply by Airless Spray, Roller or Brush.
Thinner 1-480.
VOCs 470 g/lt.
Surface Preparation.
Carbon Steel: Minimum St 2 , Recommended Abrasive Blast Cleaning Sa 2.5.
Galvanised Steel: As a minimum the surface shall be clean dry and have a rough dull profile. It is recommended to lightly sweep blast using non metallic abrasives leaving a clean, rough dull surface.
Coated Surfaces: Ensure the existing coat is intact, compatible, dry and free from oil grease and other contaminants.
Download the technical data sheet for more information.
Selemix Direct a high performance, high build, one coat, two pack polyurethane primer finish which can be applied to metal cladding, building plastics and glass. Selemix Direct has excellent durability, colour and gloss retention and is recommended for C5-M aggresive environments.
It is a multipurpose primer finish recommended for commercial and agricultural equipment, metal cladding and glass splashbacks, where a one coat solution in a fast drying smooth finish is required. Available in a wide range of gloss levels and all RAL and British standard colours.
Selemix Direct is formulated to be applied as a one coat system direct onto a wide range of substrates without the need for a primer.
It is available in a wide range of gloss levels and colours with excellent colour and gloss retention. It can be applied by Airless spray, Air assisted Airless, Conventional spray, HVLP or roller.
Selemix Direct primer finish is a high build paint with good flexibility, impact resistance and adhesion, Selemix Direct Paint can be used as a primer finish direct to steel, aluminium, galvanised steel GRP, plastisol, pvdf, light alloys and previously painted surfaces.
Selemix Direct Paint is a two pack primer finish recommended for use in atmospheric environments for application over a wide variety of substrates. An additive is available to make it suitable for smooth surfaces such as glass making it an ideal coating for glass splashbacks.
It is recommended for corrosion protection in aggressive C5 M rated environments for industrial & construction equipment, agricultural equipment, cladding, containers, building products and structural steel.
It can be applied up to 100 microns dry film thickness in a single coat by airless spray, air-assisted airless, conventional or HVLP spray equipment.
It may be applied wet on wet allowing 15 mins flash off.
The Painting and Decorating Association is a reliable source for selecting the best contractors in your area. You can access this information at https://paintingdecoratingassociation.co.uk/
For more information on high pressure water blasting you may find this link useful https://www.hse.gov.uk/pubns/guidance/oce19.pdf
Selemix Direct is available in a range of gloss levels in all RAL and British Standard colours. The mix ratio is 4 parts base colour to one part hardener. You can buy in 5lt packs which includes base and hardener, for smaller quantities the bae colour and hardener may be purchased seperately.
