Teamalak Yacht & Seaplane Varnish

£48.00

Teamalak Yacht & Seaplane Varnish a High Quality Marine Varnish for Wood with excellent UV Resistance.

Teamalak Yacht & Seaplane Varnish is for use on all surfaces where a high gloss, UV resistant finish is required, ideal for yacht woodwork and furniture. It can be used indoors or outdoors and can also be used over existing paintwork to increase the gloss and build of the final finish.

It can be applied directly to suitably prepared wood and multicoats can be applied to build gloss and depth of finish on existing painted surfaces.

When applying the product all surfaces must be clean, dry, sound and free from any contaminants. New wood and existing painted surfaces should be sanded down prior to coating to ensure an adequate “key” is produced.

Remove all loose, flaking material and treat bare areas as a new substrate then prepare accordingly.

This product is available in 2.5lt and 5lt pack sizes for free delivery throughout the UK to your home, workshop or boatyard.

SKU: N/A Categories: , ,

Description

Teamalak Yacht & Seaplane Varnish is a high gloss, high quality  marine varnish with excellent UV resistance.

Teamalak Yacht & Seaplane Varnish is for use on all wood surfaces where a high gloss UV resistant finish is required, ideal for yacht woodwork and furniture. It can be used indoors and outdoors, and can also be used over existing paintwork to increase the gloss and depth of finish.

It can be applied by brush, roller or airless spray with a minimum overcoating time of 12 hours. The recommended wet film thickness is 70 microns to achieve a dry film thickness of 30 to 35 microns. It is touch dry within 6 hours at a temperature of 20°C.

Before applying this product make sure that all surfaces are clean, dry, sound and free from any contaminants. New wood or existing painted surfaces should be sanded prior to coating to ensure an adequate “key” is produced.

Remove all loose, flaking material and treat bare areas as a new substrate then prepare accordingly.

If you are applying Teamalak Yacht & Seaplane Varnish in a confined space then you should provide adequate ventilation during application and drying. This coating can be applied directly to suitably prepared wood and any subsequent coat must be the same product.

This product comes in 2.5lt and 5lt pack sizes in a clear full gloss marine finish, with free delivery to your home, workshop or boatyard.

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants.

New Wood: should be sanded prior to coating to ensure an adequate “key” is produced.

Existing Painted Surfaces: should be cleaned,degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Technical Data

Download Datasheet Download Datasheet

Volume Solids: 49%
VOC Content:  393g/lt
Flash point:  above 32C°C
Dry Film thickness:  30 to 35 microns
Wet Film thickness:  70 microns
Theoretical coverage:  14 sq.m/lt
Touch Dry 20c°C:  6 hrs
Hard Dry 20°C: 24 hrs
Full Hardness 20°C: 5 to 7 days
Overcoating time:
Minimum 12 hrs
H&S: 
Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.

You may also like…